The TRANSREG Procedure

PROC TRANSREG Statement

The PROC TRANSREG statement invokes the TRANSREG procedure. Optionally, this statement identifies an input and an OUTTEST= data set, specifies the algorithm and other computational details, requests displayed output, and controls the contents of the OUT= data set (which is created with the OUTPUT statement). The DATA=, OUTTEST=, and PLOTS= options can appear only in the PROC TRANSREG statement. Table 104.1 summarizes the options available in the PROC TRANSREG statement. The a-options are also available in the MODEL statement, and the o-options are also available in the OUTPUT statement.

Table 104.1: Options Available in the PROC TRANSREG Statement

Option

Description

Data Set Options (PROC Statement)

DATA=

Specifies input SAS data set

OUTTEST=

Specifies output test statistics data set

ODS Graphics (PROC Statement)

PLOTS=

Specifies ODS Graphics selection

Input Control (PROC or MODEL)

REITERATE

Restarts the iterations

TYPE=

Specifies input observation type

Method and Iterations (PROC or MODEL)

CCONVERGE=

Specifies minimum criterion change

CONVERGE=

Specifies minimum data change

MAXITER=

Specifies maximum number of iterations

METHOD=

Specifies iterative algorithm

NCAN=

Specifies number of canonical variables

NSR

Specifies no restrictions on smoothing models

SINGULAR=

Specifies singularity criterion

SOLVE

Attempts direct solution instead of iteration

Missing Data Handling (PROC or MODEL)

INDIVIDUAL

Fits each model individually (METHOD=MORALS)

MONOTONE=

Includes monotone special missing values

NOMISS

Excludes observations with missing values

UNTIE=

Unties special missing values

Intercept and CLASS Variables (PROC or MODEL)

CPREFIX=

Specifies CLASS coded variable name prefix

LPREFIX=

Specifies CLASS coded variable label prefix

NOINT

Specifies no intercept or centering

ORDER=

Specifies order of CLASS variable levels

REFERENCE=

Controls output of reference levels

SEPARATORS=

Controls CLASS coded variable label separators

Control Displayed Output (PROC or MODEL)

ALPHA=

Specifies confidence limits alpha

CL

Displays parameter estimate confidence limits

DETAIL

Displays model specification details

HISTORY

Displays iteration histories

NOPRINT

Suppresses displayed output

PBOXCOXTABLE

Prints the Box-Cox log likelihood table

RSQUARE

Displays the R square

SHORT

Suppresses the iteration histories

SS2

Displays regression results

TEST

Displays ANOVA table

TSUFFIX=

Shortens transformed variable labels

UTILITIES

Displays conjoint part-worth utilities

Standardization (PROC or MODEL)

ADDITIVE

Fits additive model

NOZEROCONSTANT

Does not zero constant variables

TSTANDARD=

Specifies transformation standardization

Predicted Values, Residuals, Scores (PROC or OUTPUT)

CANONICAL

Outputs canonical scores

CLI

Outputs individual confidence limits

CLM

Outputs mean confidence limits

DESIGN=

Specifies design matrix coding

DREPLACE

Replaces dependent variables

IREPLACE

Replaces independent variables

LEVERAGE

Outputs leverage

NORESTOREMISSING

Does not restore missing values

NOSCORES

Suppresses output of scores

PREDICTED

Outputs predicted values

REDUNDANCY=

Outputs redundancy variables

REPLACE

Replaces all variables

RESIDUALS

Outputs residuals

Output Data Set Coefficients (PROC or OUTPUT)

COEFFICIENTS

Outputs coefficients

COORDINATES=

Outputs ideal point coordinates

MEANS

Outputs marginal means

MREDUNDANCY

Outputs redundancy analysis coefficients

Output Data Set Variable Name Prefixes (PROC or OUTPUT)

ADPREFIX=

Specifies dependent variable approximations

AIPREFIX=

Specifies independent variable approximations

CDPREFIX=

Specifies canonical dependent variables

CILPREFIX=

Specifies conservative individual lower CL

CIPREFIX=

Specifies canonical independent variables

CIUPREFIX=

Specifies conservative-individual-upper CL

CMLPREFIX=

Specifies conservative-mean-lower CL

CMUPREFIX=

Specifies conservative-mean-upper CL

DEPENDENT=

Specifies METHOD=MORALS untransformed dependent

LILPREFIX=

Specifies liberal-individual-lower CL

LIUPREFIX=

Specifies liberal-individual-upper CL

LMLPREFIX=

Specifies liberal-mean-lower CL

LMUPREFIX=

Specifies liberal-mean-upper CL

PPREFIX=

Specifies predicted values

RDPREFIX=

Specifies residuals

RPREFIX=

Specifies redundancy variables

TDPREFIX=

Specifies transformed dependents

TIPREFIX=

Specifies transformed independents

Macros Variables (PROC or OUTPUT)

MACRO

Creates macro variables

Other Options (PROC or OUTPUT)

APPROXIMATIONS

Outputs dependent and independent approximations

CCC

Outputs canonical correlation coefficients

CEC

Outputs canonical elliptical point coordinates

CPC

Outputs canonical point coordinates

CQC

Outputs canonical quadratic point coordinates

DAPPROXIMATIONS

Outputs approximations to transformed dependents

IAPPROXIMATIONS

Outputs approximations to transformed independents

MEC

Outputs elliptical point coordinates

MPC

Outputs point coordinates

MQC

Outputs quadratic point coordinates

MRC

Outputs multiple regression coefficients


DATA=SAS-data-set

specifies the SAS data set to be analyzed. If you do not specify the DATA= option, PROC TRANSREG uses the most recently created SAS data set. The data set must be an ordinary SAS data set; it cannot be a special TYPE= data set.

OUTTEST=SAS-data-set

specifies an output data set to contain hypothesis tests results. When you specify the OUTTEST= option, the data set contains ANOVA results. When you specify the SS2 a-option, regression tables are also output. When you specify the UTILITIES o-option, conjoint analysis part-worth utilities are also output. For more information about the OUTTEST= data set, see the section OUTTEST= Output Data Set.

PLOTS <(global-plot-options)> <= plot-request <(options)>>
PLOTS <(global-plot-options)> <= (plot-request <(options)> <... plot-request <(options)>>)>

controls the plots produced through ODS Graphics. When you specify only one plot request, you can omit the parentheses around the plot request. Here are some examples:

plots=none
plots=(residuals transformation)
plots(unpack)=boxcox
plots(unpack)=(transformation boxcox(p=0))
plots=(residuals(unpack) transformation(dep unp) boxcox(t rmse))

ODS Graphics must be enabled before plots can be requested. For example:

ods graphics on;

proc transreg plots=all;
   model identity(y) = pbspline(x);
run;

ods graphics off;

For more information about enabling and disabling ODS Graphics, see the section Enabling and Disabling ODS Graphics in ChapterĀ 21: Statistical Graphics Using ODS.

If ODS Graphics is enabled, but you do not specify the PLOTS= option, then PROC TRANSREG produces a default set of plots. The fit, scatter, residual, and observed-by-predicted plots are available with METHOD= MORALS and also with METHOD=UNIVARIATE when there is only one dependent variable. When no method is specified and there is more than one dependent variable, and when regression plots are requested, the default method is set to METHOD=MORALS. When there is more than one dependent variable, when METHOD= is not specified, or when METHOD=MORALS is specified and PLOTS=ALL is specified, the plots that are produced might be different from those you would see with METHOD=UNIVARIATE and PLOTS=ALL. Certain plots appear by default when ODS Graphics is enabled and certain combinations of options are specified. The Box-Cox $F = t^2$ and log-likelihood plots appear when a BOXCOX dependent variable transformation is specified. The regression fit plot appears for models with a single dependent variable that is not transformed (for example, IDENTITY (y)), a single quantitative independent variable that might or might not be transformed, and at most one CLASS independent variable. Preference mapping plots appear when the COORDINATES o-option is used.

The global plot options include the following:

INTERPOLATE
INT

uses observations that are excluded from the analysis for interpolation in the fit and transformation plots. By default, observations with zero weight are excluded from all plots. These include observations with a zero, negative, or missing weight or frequency and observations excluded due to missing and invalid values. You can specify PLOTS(INTERPOLATE)=(plot-requests) to include some of these observations in the plots. You might want to use this option, for example, with sparse data sets to show smoother functions over the range of the data (see the section The PLOTS(INTERPOLATE) Option). Observations with missing values in CLASS variables are excluded from the plots even when PLOTS(INTERPOLATE) is specified.

ONLY
ONL

suppresses the default plots. Only plots specifically requested are displayed.

UNPACKPANEL
UNPACK
UNP

suppresses paneling. By default, multiple plots can appear in some output panels. Specify UNPACKPANEL to get each plot in a separate panel. You can specify PLOTS(UNPACKPANEL) to unpack the default plots. You can also specify UNPACKPANEL as a suboption with TRANSFORMATION, RESIDUALS, PBSPLINE, and BOXCOX.

The plot requests include the following:

ALL

produces all appropriate plots. You can specify other options with ALL; for example, to request all plots and unpack only the residuals, specify PLOTS=(ALL RES(UNP)).

BOXCOX <(options )>
BOX <(options )>

requests a display of the results of the Box-Cox transformation. These results are displayed by default when there is a Box-Cox transformation. The BOXCOX plot request has the following options:

P=n

adds t or $F = t^2$ curves to the legend for the functions where $p(t) < n$, where t is the t statistic corresponding to the optimal lambda. You can specify P=0 to suppress the legend and P=1 to see all curves in the legend. The default value comes from the BOXCOX(variable / ALPHA=p) specification, which by default is 0.05.

RMSE
RMS

plots the root mean square error as a function of lambda.

T

plots t statistics rather than $F = t^2$ statistics.

UNPACKPANEL
UNPACK
UNP

plots the t or $F = t^2$ and log-likelihood plots in separate panels.

FIT <(options )>

requests a regression fit plot. This plot is produced by default whenever it is appropriate. It is produced when the dependent variable is specified with the IDENTITY transform, and when there is one quantitative independent variable (for example, IDENTITY for linear fit, SPLINE or one of the other transformations for a nonlinear fit, or PSPLINE) and at most one CLASS variable. When there is a CLASS variable, separate fits are produced within levels based on your model. You would specify the FIT plot request only to specify a FIT option or with the ONLY global plot option. The FIT plot request has the following options:

FORMULA
FOR

displays the fit function as an equation in regression fit plots. This option is valid when a fit plot is produced and either an IDENTITY transform or a PSPLINE expansion with degree less than ten and no knots is specified for a single independent variable. When this option is specified, you can output the formula to a data set by using the ods output formula=SAS-data-set statement. This is the formula, complete with Unicode specifications for polynomials, that is used in the fit plot template to make the formula.

NOCLM

suppresses the confidence limits in regression fit plots.

NOCLI

suppresses the individual prediction limits in regression fit plots.

NOOBS

suppresses the observations showing only the fit function and optionally the confidence and prediction limits.

NONE

suppresses all plots.

OBSERVEDBYPREDICTED
OBP
OBS

plots the transformed dependent variable as a function of the regression predicted values.

PBSPLINE <(UNPACKPANEL)>
PBS <(UNPACK)>

requests the penalized B-spline criterion plots. You would specify the PBSPLINE plot request only to specify a PBSPLINE option or with the ONLY global plot option. The PBSPLINE plot request has the following option:

UNPACKPANEL
UNPACK
UNP

plots each criterion plot in a separate panel.

PREFMAP
PRE

plots ideal point or vector preference mapping results when either two IDENTITY or two POINT independent variables are specified along with the COORDINATES option.

RESIDUALS <(options)>
RES <(options)>

plots the residuals as a function of each of the transformed independent variables, except coded CLASS variables. The RESIDUALS plot request has the following options:

CLASS
CLA

plots the residuals as a function of each of the transformed independent variables, including coded CLASS variables. Note that the ALL plot request, which you use to request all plots, specifies the RESIDUALS plot request without the CLASS option.

UNPACKPANEL
UNPACK
UNP

plots the residuals in separate plots, not several per panel.

SMOOTH
SMO

adds a LOESS smooth function to the residuals plots.

SCATTER
SCA

plots the scatter plot of observed data, before the transformations, for models with a single quantitative dependent variable, a single quantitative independent variable, and at most one CLASS independent variable.

TRANSFORMATION <(options)>
TRA <(options)>

plots the variable transformations. The TRANSFORMATION plot request has the following options:

DEPENDENTS
DEP

plots only the dependent variable transformations.

INDEPENDENTS
IND

plots only the independent variable transformations.

UNPACKPANEL
UNPACK
UNP

plots the transformations in separate plots, not several per panel.