Robust Distance :: SAS/STAT(R) 13.2 User's Guide

Algorithm

PROC ROBUSTREG implements a generalized MCD algorithm that is based on the fast-MCD algorithm formulated by Rousseeuw and Van Driessen (1999), which is similar to the algorithm for least trimmed squares (LTS).

Mahalanobis Distance versus Robust Distance

The canonical Mahalanobis distance is defined as

$\mr{MD}(\mb{x}_ i) = [(\mb{x}_ i - \bar{\mb{x}})’ \bar{\bC }(\bX )^{-1}(\mb{x}_ i - {\bar{\mb{x}}})]^{1 / 2}$

where ${\bar{\mb{x}}} = {1\over n} \sum _{i=1}^ n \mb{x}_ i$ and $\bar{\bC }(\bX ) = {1\over n-1}\sum _{i=1}^ n (\mb{x}_ i - {\bar{\mb{x}}})’ (\mb{x}_ i - {\bar{\mb{x}}})$ are the empirical multivariate location and scatter, respectively. Here $\mb{x}_ i=(x_{i1},\ldots ,x_{ip})’$ excludes the intercept. The relationship between the Mahalanobis distance $\mr{MD}(\mb{x}_ i)$ and the hat matrix $\bH = (h_{ij}) =\bX (\bX ’\bX )^{-1}\bX ’$ is

$h_{ii} = {1\over n-1} {\mr{MD}}_ i^2 + {1\over n}$

The canonical robust distance is defined as

$\mr{RD}(\mb{x}_ i) = [(\mb{x}_ i - \bT (\bX ))’ \bC (\bX )^{-1}(\mb{x}_ i - \mb{T}(\bX ))]^{1 / 2}$

where $\mb{T}(\bX )$ and $\mb{C}(\bX )$ are the robust multivariate location and scatter, respectively, that are obtained by the MCD method.

To achieve robustness, the MCD algorithm estimates the covariance of a multivariate data set mainly through an MCD h-point subset of the data set. This subset has the smallest sample-covariance determinant among all possible h-subsets. Accordingly, the breakdown value for the MCD algorithm equals ${(n-h)\over n}$ . This means the MCD estimate is reliable, even if up to ${100(n-h)\over n}\%$ observations in the data set are contaminated.

Low-Dimensional Structure

It is possible that the original data are in p-dimensional space but the h-point subset that yields the minimum covariance determinant lies in a lower-dimensional hyperplane. Applying the canonical MCD algorithm to such a data set would result in a singular covariance problem (called exact fit in Rousseeuw and Van Driessen 1999), such that the relevant robust distances cannot be computed. To deal with the singularity problem and provide further leverage-point analysis, PROC ROBUSTREG implements a generalized MCD algorithm. (For more information, see the section Generalized MCD Algorithm.) The algorithm distinguishes in-(hyper)plane points from off-(hyper)plane points, and performs MCD leverage-point analysis in the dimension-reduced space by projecting all points onto the hyperplane.

Low-dimensional structure is often induced by classification covariates. Suppose that, in a study that has 25 female subjects and 5 male subjects, gender is the only classification effect. If the breakdown setting is greater than ${5 \over (25+5)}$ , the canonical MCD algorithm fails, and so does the relevant leverage-point analysis. In this case, the MCD h-subset would contain only female observations, and the constant gender in the h-subset would cause the relevant MCD estimate to be singular. The generalized MCD algorithm solves that problem by identifying all male observations as off-plane leverage points, and then carries out the leverage-point analysis, with all the other covariates being centered separately for female and male groups against their group means.

In general, low-dimensional structure is not necessarily due to classification covariates. Imagine that 80 children are supposed to play on a straight trail (denoted by $y=x$ ) but that some adventurous children go off the trail. The following statements generate the Children data set and the relevant scatter plot:

data Children;
   do i=1 to 80;
      off_trail=ranuni(321)>.9;
      x=rannor(111)*ranuni(321);
      trail_x=(i-40)/80*3;
      trail_y=trail_x;
      if off_trail=1 then y=x-1+rannor(321);  
      else y=x;
      output;
   end;
run;

proc sgplot data=Children;
   series   x=trail_x y=trail_y/lineattrs=(color="red" pattern=4);
   scatter  x=x y=y/group=off_trail;
   ellipse  x=x y=y/alpha=.05 lineattrs=(color="green" pattern=34);
run;

Figure 86.17 shows the positions of all 80 children, the trail (as a red dashed line), and a contour curve of regular Mahalanobis distance that is centered at the mean position (as a green dotted ellipse). In terms of regular Mahalanobis distance, the associated covariance estimate is not singular, but its relevant leverage-point analysis completely ignores the trail (which is the entity of the low-dimensional structure). The children outside the ellipse are defined as leverage points, but the children off the trail would not be viewed as leverage points unless they had large Mahalanobis distances. As mentioned in Rousseeuw and Van Driessen (1999), the canonical MCD method can find the low-dimensional structure, but it does not provide further robust covariance estimation because the MCD covariance estimate is singular. As an improved version of the canonical MCD method, the generalized MCD method can find the trail, identify the children off the trail as off-plane leverage points, and further execute in-plane leverage analysis. The following statements apply the generalized MCD algorithm to the Children data set:

ods graphics on;
proc robustreg data=children plots=ddplot(label=none);
   model i = x y/leverage(mcdinfo opc);
run;
ods graphics off;

Figure 86.17: Scatter Plot for Children Data

Figure 86.18 exactly identifies the equation that underlies the trail. The analysis projects off-plane points onto the trail and computes their projected robust distances and projected Mahalanobis distances the same way as it does for the in-plane points.

Figure 86.18: Robust Dependence Equations

The ROBUSTREG Procedure

Note:

The following robust dependence equations simultaneously hold for 86.25% of the observations in the data set. The breakdown setting for the MCD algorithm is 25.00%.

y =	x

Figure 86.19 shows the relevant distance-distance plot. Robust distance is typically greater than Mahalanobis distance because the sample covariance can be strongly influenced by unusual points that cause the sample covariance to be larger than the MCD covariance.

Figure 86.19: DD Plot for Children Data

Note: The PROC ROBUSTREG step in this example is used to obtain the leverage diagnostics; the response is not relevant for this analysis.

Through the off-plane and in-plane symbols and the horizontal cutoff line in Figure 86.19, you can separate the children into four groups:

on the trail and close to the MCD center
on the trail but far away from the MCD center
off the trail but close to the MCD center
off the trail and far away from the MCD center

The children in the latter three groups are defined as leverage points in PROC ROBUSTREG.

Generalized MCD Algorithm

The generalized MCD algorithm follows the same resampling strategy as the canonical MCD algorithm by Rousseeuw and Van Driessen (1999) but with the following modifications:

Data are orthonormalized before further processing. The orthonormalized covariates, ${\mb{x}_ i^*}$ , are defined by ${\mb{x}_ i^*}=(\mb{x}_ i-\bar{\mb{x}})\bP \bLambda ^{-1/2}$ , where $\bP$ and $\bLambda$ are the eigenvector and eigenvalue matrices, respectively, of $\bar{\bC }(\bX )$ (that is, $\bar{\bC }(\bX )=\bP \bLambda \bP ’$ ).
Let

$S_ h(\bX ^*)={1\over h-1}\sum _{j=1}^ h ({\mb{x}_{i_ j}^*} - {\bar{\mb{x}}^*})’ ({\mb{x}_{i_ j}^*} - {\bar{\mb{x}}^*})= \sum _{j=1}^{p-1}{\lambda _ j \mb{p}_ j{\mb{p}_ j}’}$

denote the covariance and eigendecomposition of a low-dimensional h-subset $\{ {\mb{x}_{i_1}^*},\cdots ,{\mb{x}_{i_ h}^*}\}$ , where $\bar{\mb{x}}^*={1\over h}\sum _{j=1}^ h {\mb{x}_{i_ j}^*}$ and the eigenvalues satisfy

$\lambda _1\ge \cdots \ge \lambda _ q>0=\lambda _{q+1}=\cdots =\lambda _ p$

Then, the rank of $S_ h(\bX ^*)$ equals q, and the pseudo-determinant of $S_ h(\bX ^*)$ is defined as $\prod _{j=1}^ q\lambda _ j$ . In finite-precision arithmetic, q is defined as the number of $\lambda$ ’s where ${\lambda _ i \over \lambda _1}$ is greater than a certain tolerance value. You can specify this tolerance by using the PTOL= suboption of the LEVERAGE option.
If $S_ h(\bX ^*)$ and ${\bar{\mb{x}}^*}$ are the covariance and center estimates, respectively, then the projected Mahalanobis distance for $\mb{x}_ i$ is defined as

$\left[\sum _{j=1}^ q{\left((\mb{x}_ i^* - {\bar{\mb{x}}^*})\mb{p}_ j\right)^2 \over \lambda _ j}\right]^{1/2}$

The generalized algorithm also computes off-plane distance for each $\mb{x}_ i$ as

$\left[\sum _{j=q+1}^{p}{\left((\mb{x}_ i^* - {\bar{\mb{x}}^*})\mb{p}_ j\right)^2}\right]^{1/2}$

In finite-precision arithmetic, ${\left(({\mb{x}_ i^*} - {\bar{\mb{x}}^*})\mb{p}_ j\right)^2}$ in the previous off-plane formula are truncated to zero if they satisfy

${{\left(({\mb{x}_ i^*} - {\bar{\mb{x}}^*})\mb{p}_ j\right)^2} \over \lambda _ j}\le \mbox{cutoff}$

You can tune this $\mbox{cutoff}$ by using either the PCUTOFF= or PALPHA= suboption of the LEVERAGE option. The points with zero off-plane distances are called in-plane points; otherwise, they are called off-plane points. Analogous to ordering all points in terms of their canonical Mahalanobis distances, for the generalized MCD algorithm the points are first sorted by their off-plane distances, and the points with the same off-plane distance values are further sorted by their projected Mahalanobis distances.
Instead of comparing the determinants of h-subset covariance matrices, the generalized algorithm compares both the ranks and pseudo-determinants of the h-subset covariance matrices. If the ranks of two matrices are different, the matrix that has the smaller rank is treated as if its determinant were smaller. If two matrices are of the same rank, they are compared in terms of their pseudo-determinants.
Suppose that the $S_ h(\bX ^*)$ of the minimum determinant is singular. Then the relevant low-dimensional structure or hyperplane can be identified by using the eigendecomposition of $S_ h(\bX ^*)$ . The eigenvectors that correspond to the nonzero eigenvalues form a basis for the low-dimensional hyperplane. The projected off-plane distance (POD) for $\mb{x}_ i$ is defined as the off-plane distance that is associated with the $S_ h(\bX ^*)$ . To provide further leverage analysis on the low-dimensional hyperplane, every ${\mb{x}_ i^*}$ is transformed into $({\mb{x}_ i^*}\mb{p}_1,\cdots ,{\mb{x}_ i^*}\mb{p}_ q)$ , where $\mb{p}_ j$ are the eigenvectors of the $S_ h(\bX ^*)$ . The projected robust distance (PRD) is then computed as the reweighted Mahalanobis distance on all the transformed in-plane points. The off-plane points are assigned zero weights at the reweighting stage, because they are leverage points by definition. The in-plane points are classified into two groups, the normal group and the in-plane leverage group. This classification is made by comparing their projected robust distances with a leverage cutoff value. (For more information, see the section Leverage-Point and Outlier Detection.) This reweighting process mirrors the one that was proposed by Rousseeuw and Van Driessen (1999). However, the degrees of freedom p for the reweighting critical $\chi ^2$ value are replaced by q. You can control the $\chi ^2$ critical value by specifying the MCDCUTOFF= or MCDALPHA= option.

If the data set under investigation has a low-dimensional structure, you can use two ODS objects, DependenceEquations and MCDDependenceEquations, to identify the regressors that are linear combinations of other regressors plus certain constants. The equations in DependenceEquations hold for the entire data set, whereas the equations in MCDDependenceEquations apply only to the majority of the observations.

By using the OPC suboption of the LEVERAGE option, you can request an ODS table called DroppedComponents. Figure 86.20 shows the DroppedComponents table for the Children data set example. This table contains a set of coefficient vectors for regressors, which form a basis of the complementary space for the relevant low-dimensional structure.

Figure 86.20: MCD-Dropped Components

Coefficients for MCD-Dropped Components
Parameter	RobustDrop1
x	-1.000
y	1.0000

By using the MCDINFO suboption of the LEVERAGE option, you can request that detailed information about the MCD covariance estimate be displayed in four ODS tables: MCDProfile, MCDCenter, MCDCov, and MCDCorr. Figure 86.21 shows an example of the MCD information tables for the Children data set. The number of dimensions in the table MCDProfile equals the number of nonintercept regressors minus the number of design-dropped components. The specified value of H is the same as h for the h-subset that you can specify by using the QUANTILE= suboption of the LEVERAGE option in the MODEL statement. The reweighted H is the number of observations that are actually used to compute the MCD center and MCD covariance after the reweighting step of the MCD algorithm.

Figure 86.21: MCD Information

MCD Profile
Number of Dimensions	2
Number of Robust Dropped Components	1
Number of Observations	80
Number of Off-Plane Observations	11
Specified Value of H	60
Reweighted Value of H	63
Breakdown Value	0.2500

MCD Center
ParameterName	Parameter	Center
x	x	0.0307
y	y	0.0307

MCD Covariance
	x	y
x	0.207713	0.207713
y	0.207713	0.207713

MCD Correlation
	x	y
x	1	1
y	1	1